|
AiC Company's
Product Identification
|
A
AiC Product |
20
Size
|
C
Style /Part |
XX
Material (AL-SS-CB) |
|
|
5=1/2"
7=3/4"
10=1"
12=1-1/4" |
15=1-1/2"
20=2"
25=2-1/2"
30=3" |
40=4"
50=5"
60=6" |
|
If the coupler is an
increaser/reducer, the coupler is the first size shown in the
part number. (e.g. A1520BAAL is a 1-1/2"coupler with a
2" adapter) All other parts are designed by Cam and
Groove part first, then the attachment method. |
|
Terms, Conditions & Ordering Information:
When ordering couplers, it is the responsibility of
the end user to specify the basic metal of the coupler and/or adapter and
the gasket material, based on his/her knowledge of the solvent or
corrosive characteristics, and the temperature and pressure of the vapor
or liquid with which the basic metal of the coupler and or adapter and
gaskets will be in contact. Couplers must be used with a properly
maintained and non-deteriorated gasket in order to function properly.
Atlantic international Coupling Company strongly recommends the use of
Atlantic international Coupling Company gaskets. Atlantic international
Coupling Company specifically disclaims any responsibility for damage or
injury when couplers are used without regard to the corrosive
characteristics of the material with which the coupler is being used, and
without properly maintained or deteriorated gasket. The Atlantic
international Coupling, when properly maintained and used with properly
maintained and non-deteriorated gasket, will provide a tight connection
under reasonable and foreseeable conditions. Improper maintenance or use,
or use with an improper or deteriorated gasket, can result in damage or
injury. Contact the factory if you have any questions regarding the
efficient and safe use of our couplings.
Warranty:
All merchandise sold by us is subject to this
standard warranty. Our products are warranted to be free from defects in
material or workmanship. Our liability for breach of any and all
warranties, expressed or implied, is limited to refunding our invoice
price of the product, or at our option, the replacement of the product. If
any product manufactured by Atlantic international Coupling Company (AiC)
is found by us to be defective either in material or workmanship, under
proper usage and service, the invoice price will be refunded or at our
option will be replaced free of charge including transportation charges
but not cost of installation. The refund of the invoice price or the
replacement of the product is the maximum liability of the Company. The
sale of our products under any other warranty or guarantee, expressed or
implied, isn't authorized by the Company.
|
